Bodenbearbeitungsgeräte Zum Verkauf

24 in Rock Clearance • 540 PTO Driven

18 in Smooth Front Discs • 18 in Smooth Rear Discs • 8 in Spacing • Hitch Leveling

20 in Smooth Front Discs • 20.5 in Smooth Rear Discs • 9 in Spacing

3/8 in x 15 in Tines • Coil Packer

28 in Rock Clearance • Ground Driven

12 in Spacing • C-Shanks • Sweeps • Rear Harrow • Valmar 2055 Granular Package • Single Shoot

35 in Blade • Countour Disk

21 in Notched Front Discs • 21 in Notched Rear Discs • 9 in Spacing • Roller Cage

42 in Drum Diameter • 1/2 in Drum Wall Thickness

23 in Notched Front Discs • 23 in Smooth Rear Discs • 9 in Spacing • Mud Scrapers

32 in Drum Diameter • 1/2 in Drum Wall Thickness

Hydraulic Tine Adjustment • 5 Bar • 9/16 in x 24 in Tines • Valmar 3255 Granular Applicator • 16.5-16.5 Tires

Hydraulic Drive

1000 PTO • 540/1000 rpm PTO gearbox •Pair of standard gears: 17-23 •Rotor revolution PTO 540 rpm (2speed): 193-353 •Rotor revolution PTO 1000 rpm (1speed): 357 •Round blade-holders •Quick blade release •Heavy duty gear-tray with double reinforcement •Universal three point hitch • cat. II •Swinging front hitches •PTO shaft with slip clutch (1-3/8" Z6 for tractor 540 rpm PTO) is standard •PTO shaft with slip clutch (1-3/8" Z21 for tractor 1000 rpm PTO) is optional •Rear roller pin depth adjustment •Rear PTO •Rear levelling bar with mechanical central adjuster •2 blades per rotor •long dampened side protections

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment

540/1000 rpm PTO gearbox •Pair of standard gears: 17-23 •Rotor revolution PTO 540 rpm (2speed): 193-353 •Rotor revolution PTO 1000 rpm (1speed): 357 •Round blade-holders •Heavy duty gear-tray with double reinforcement •Universal three point hitch • cat. II •Swinging front hitches •PTO shaft with slip clutch (1-3/8" Z6 for tractor 540 rpm PTO) is standard •PTO shaft with slip clutch (1-3/8" Z21 for 1000 rpm PTO) is optional •Rear cage roller standard (packer roller is optional) •Rear PTO •Rear levelling bar with mechanical central adjuster standard •2 blades per rotor

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders 2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment

540/1000 rpm PTO gearbox •Pair of standard gears: 17-23 •Rotor revolution PTO 540 rpm (2speed): 193-353 •Rotor revolution PTO 1000 rpm (1speed): 357 •Round blade-holders •Quick blade release •Heavy duty gear-tray with double reinforcement •Universal three point hitch • cat. II •Swinging front hitches •PTO shaft with slip clutch (1-3/8" Z6 for tractor 540 rpm PTO) is standard •PTO shaft with slip clutch (1-3/8" Z21 for tractor 1000 rpm PTO) is optional •Rear roller pin depth adjustment •Rear PTO •Rear levelling bar with mechanical central adjuster •2 blades per rotor •long dampened side protections

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)

Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I + II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)

Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I + II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)

Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I + II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned inwards) •2-speeds (@540 rpm) or 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat II and III • 3 point hitch •Box frame •PTO shaft size 8 (Eurocardan) with slip clutch •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system

540/1000 rpm PTO gearbox •Rotor revolutions PTO 540 rpm (3 speed): 133-162-220 •Rotor revolutions PTO 1000 rpm ( 3speed): 181-246-300 •Slip clutch PTO shaft: 1-3/8" Z6 tractor side yoke for 540 rpm PTO 1-3/8" Z21 tractor side yoke for 1000 rpm PTO •Heavy-duty rotor hub •Side gears drive in oil bath •Universal three point hitch • cat. II •Swinging front hitches for balancing and leveling rough land •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I+II •Centre + offset mounting is standard •6 blades per flange

Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I + II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)

Single speed gearbox with 540 rpm PTO •Rotor revs 352 rpm •PTO shaft with shear pin (1-3/8" Z6 tractor side yoke) •Strengthened 6mm housing transmission • high strength steel •Universal three point hitch • cat. II •Rear roller central adjustment for depth control •Round blade-holders •Hitch will offset •Depth control by 18" cage roller with central adjustment •2 blades per rotor

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment

6 curved blades per flange mounted in spiral line (for normal soils) • Standard rotor (with end blades turned inwards) • 2-speeds (@540 rpm) or 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator • Side gear drive in oil bath with sight glass • Lower 3rd point hitches with swinging movement • Adjustable side skids to control the desired working depth • Parking stand • Cat II and III • 3 point hitch • Box frame • PTO shaft size 8 (Eurocardan) with slip clutch • "Long life" HD seal provided inside the rotor's bearings • Polyester powder coating system

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitch adjustable will offset to the right side •Adjustable side skids to control the desired working depth •Parking stand •Cat 1and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life" HD seal provided inside the rotor

540/1000 rpm PTO gearbox •Rotor revolutions 540 rpm PTO (4 speed): 175-214-262-143 •Rotor revolutions 1000 rpm PTO (2 speed): 324-356 •Slip clutch PTO shaft: 1-3/8" Z6 tractor side yoke with 540 rpm PTO 1-3/8" Z21 tractor side yoke with 1000 rpm PTO •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat II •Offset front bar hitches •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids

Multispeed Gearbox 540 rpm PTO • Rotor revolutions (4 speed): 178-201-227-256 • PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) • Side gear drive in oil bath • Universal three point hitch • Cat I+II • Will offset 8" to the right • 6 blades per flange (side blades are always mounted inwards)

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I+II •Centre + offset mounting is standard •6 blades per flange

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I+II •Centre + offset mounting is standard •6 blades per flange

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I+II •Centre + offset mounting is standard •6 blades per flange

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment •

Single speed gearbox with 540 rpm PTO •Rotor revolution: 290 rpm •PTO shaft with shear pin (1-3/8" Z6 tractor side yoke) •Tubular transmission in oil bath •Hardened and tempered blade holders •2 blades per rotor ("U" shaped blades) •Blades replacement with just one nut •Universal three point hitch • Cat. I •Rear roller pin adjustment •Side guards without protrusions to protect plants

6 "L" blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •1-speed gearbox made by SICMA with conical roller bearings •Side chain drive in oil bath with automatic chain tensioner and sight glass •Lower 3rd point hitches with adjustable width • will offset to the right •Adjustable side skids to determine the desired working depth •Parking stand •Cat I • 3 point hitch •PTO shaft size 4 (Eurocardan) with Slip Clutch protection •Polyester powder coating system

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings

PTO shaft central direct •Heavy duty side PTO shaft with cam clutch •Double side transmission with oil bath gears •Heavy duty barrel type bearings •Universal three point hitch • Cat. III •Swinging/rigid front bar hitches •6 blades per flange (side blades are always mounted inwards) •Shield spring adjusters •Hydraulic roller side adjusters •2 +2 hydraulic adjuster for folding units lifting •Central eradicator •Small central share between the rollers •Transport width (folded): 8 1/4 ft. •Rear lights for transport •Double rear bonnet

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 140-174-215-266 •Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids •Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) •New flank for deeper tillage (B-super model only) •Hardened-steel antiwear skids (B-super model only)